Moog Voyager V3 Professional Synthesiser
Product Info
Presenting the award-winning Voyager Performer Edition, an all analog performance synthesizer incorporating virtually all of the functions of the original synthesizer, produced from 1971 to 1984, and a number of new features that makes this the synth for the 21st Century.
This investment will last you a life-time. The Voyager is paneled in oak with a stunning custom finish. Features include 3 ultra-stable oscillators, dual moog filters, 4-stage analog envelope generators, flexible modulation busses, and much much more...
If you want THE classic sound, this is it. Period. This has Bob Moog's legendary synthesizer design expertise in its circuits. Say no more. It sounds amazing, looks amazing, and feels amazing. There is no substitute.
Now, all Performer Editions will have the upgraded software and hardware to allow the player 7 banks of 128 presets and the following capabilities:
The External Mixer knob (just right of the display panel) has a dual function that allows you to rapidly change presets as opposed to continuously punching the cursor buttons.
MIDI Enhancements:
Allows you to send either 7 or 14 bit resolution from the Mod Wheel and optionally reduces the amount of MIDI data being sent from the Touch Surface.
Key features and specifications
- Three wide-range, high stability VCO's (Voltage Controlled Oscillators) with continuously-variable waveforms.
- Five-input mixer for combining the audio sources prior to filtering.
- Dual mode filter module includes dual lowpass and highpass-lowpass filtering.
- Dual lowpass mode consists of two lowpass-resonant filters in parallel, one per output channel.
- Highpass-lowpass mode consists of lowpass filter in series with a highpass filter.
- The Envelopes Module generates two wide-range ADSR (Attack Decay Sustain Release) envelopes. The Filter Envelope sweeps the filter and is available for modulation shaping. The Volume Envelope shapes the overall volume.
- Low Frequency Oscillator generates triangular, square, Sample & Hold, and smoothed Sample & Hold waveforms for use as modulating signals.
- Selects the sources, destinations, and shaping signals for the MOD WHEEL bus and the EXT PEDAL/ON bus.
- Pedal/Control Connections:
- 10 Jacks that accept either expression pedals or control voltages, and control the following performance parameters:
- Volume
- Pan
- Filter Cutoff
- Waveform
- Pitch
- Mod2 - External Modulation Source
- Mod1 External control of the pedal Mod. Bus
- Sample and Hold In
- Envelopes Rate
- LFO Rate
- Accessory Port: Delivers the Control Voltage and gate signals generated inside the Voyager to a standard DB-25 connector. This is designed for use with the VX-351 Voyager CV Expander.
- LFO Sync: A footswitch or gateapplied to this input will reset the LFO waveform to the beginning of its cycle.
- Envelopes Gate: A footswitch or gate applied to this input will start the envelopes.
- Sample and Hold Gate: A gate signal applied to this jack will trigger a new sample and hold voltage
- Release: foot switch plugged into this jack will have the same effect as depressing the corresponding switch on the left hand controller panel.
- Mixer Ext In: Plug any instrument-level or line-level audio signal in this jack to combine with the oscillator and noise signals prior to filtering.
- Mix Out/Filter Audio In: The output of the audio mixer appears here, before being fed to the filter. Normally, the Mixer output is bridged directly to the filter input. If you plug something into this jack, that breaks the normal connection. Using a standard insert cable (1/4" TRS plug to two 1/4" TS plugs) this jack can be used as an effects loop for external processing of the Mix before it goes to the filter.
- Left(Mono) and Right Audio Outputs: The audio outputs are 1/4 " unbalanced outputs. The two output channels are summed to mono when only the left(mono) output is used.
- 12V Lamp Supply: BNC Lamp Socket provides 12VDC for a gooseneck lamp
- MIDI In, Thru, and Out Connectors: Standard MIDI connectors for interfacing with other MIDI gear.
- Power Input: The Voyager's power input accepts a standard power cable. The Voyager works from 100-250 VAC, 50-60 Hz.
- Dimensions: 30 1/2" Wide X 18" Deep X 3" High (when flat) 12" High when fully upright.
- Weight: 40 lbs.
Reviews
Alternatives
Moog Voyager Electric Blue V3 Professional Synthesiser
Analog Performance Synthesizer - Electric Blue Edition
£1999.99
Clavia Nord Stage 76 Professional Synthesiser
Featuring the best of Clavias award-winning technologies, the Nord Stage hosts three different instrument sections - Organ, Piano and Synth - plus an…
£1999.99
Moog Voyager Electric Blue V3 Professional Synthesiser
Analog Performance Synthesizer - Electric Blue Edition
£1999.99
